- About Us
- Contact Us
- Order Steps
We will be closed for Chinese New Year holiday from 27 January 2017 until 01 February 2017. Business will resume on 02 February 2017.
Our new business hour is as follows:-
Monday - Friday : 9.00am-6.00pm
Saturday : 9.30am-1.00pm (By appointment)
Sunday & public holiday : Closed
+6 04-421 4116 / +6 04-424 1515
+6 04-423 8115
+6 010-332 0573
(Available during office hour only)
A08 MDK NEST BOOSTING HORMONES 4L
A09 MDK NEST BOOSTING HORMONE 1L
Intensively increase the smell of swiftlets in swiftlet house to create the effect of big population in new house.
Strong and effective aroma with affordable price.
It is made of natural materials and safe for human and animals.
Able to refresh the air in swiftlet house.
No ammonia added.
Way to use:
Dilute Nest Boosting Hormone with water in a ratio of 1(Hormone):2(Water).
Spray it to wall and floor.(1 foot from nesting plank).
Apply every 2 weeks for first six months. Then, apply every 1-2 months for maintenance.
Review from customer
Review from Jerantut customer[12 April 2016]
Mr. Tan bought the aroma from us at the end of September 2014.
The video shows the effect of Nest Boosting Hormone after 2-3 weeks of usage captured by his phone.
Heartiest thanks to your continual support, Mr. Tan.
Heartiest thanks to your continual support, Mr. Tan.
[updated on 21 October 2014]
HA03 REPLACEMENT CERAMIC KIT FOR MIST MAKER (9 PCS)
- Comes with replacement ceramic disc (membrane) & key tool for installation
- Black rubber edge around disc is for packaging only, remove it before installing
- The diameter of each ceramic disc is 2cm.
After operation the mist unit for some time, you may notice a decrease in the amount of mist produced or it may stop working altogether. At that time, you should either clean or replace the ceramic disc.
Follow the instruction below to change the disc:
2. Using the replacement disc/key tool, insert the key into the winding ring and turn counter clockwise.
3. Remove the filler piece(washer) and ceramic disc. IMPORTANT, note that there is a front and back of the ceramic. Be sure to re-install with the correct side(No black color ring side) facing up.
4. Clean mineral deposits on the ceramic with a soft cloth and re-install it or proceed to install a new ceramic disk in the reverse order of the above.
5. The inside area of the mist maker cavity must be completely dry before the parts are installed.
Labels: Humidifier‘s Accessories加湿器配件
HD03 NESTPRO TAIWAN CENTRIFUGAL HUMIDIFIER SFAZNP-HM6000 (SET)
Better coverage for water tank to prevent birds' dropping get in the tank
About 20sqm diffusion range
Spraying height is about 3-5m
Power Consumption : 240V/50Hz, 1/5HP
Water Consumption : 3.5 – 4Liter/hr
Height : 57cm
Base Size : 32cm diameter
Water Storage : 4 liter
HD10 NEST AMP CENTRIFUGAL HUMIDIFIER NM5500
Made in Taiwan.
New bald top design without fan blade.
NM5500 comes with 2 top covers and a skirt.
a) 3-way cap
b) Mesh cover
without propeller, more safer
Environmental protection with lesser water usage
Difussion range: 20 square meters
Spraying height: 2.5 - 3.5 meters
4.5litre (float-valve control)
4 - 5 litres/1 hour
1/8 - 1/6 HP
230V, 50Hz 0.6A
230V, 60Hz 0.85A
50Hz 2700 - 2900/1 (RPM/M)
60Hz 3300 - 3450/1 (RPM/M)
- Suitable for multi-purposes:- Bird nest farming, disinfection in roomto free from germs, indoor humidify, textile factory, paper making, knitting works, medicine manufacturing, capsule, store house, hospital, public place, garden, green house, mushroom cultivation, farm and pasture, vegetable and fruit storage, bread making, etc.
NC50 SWIFTPRO BIRD NEST NITRITE PURIFIER MODEL:S88
- Easy to use
- Effective & safe
- Designed for edible bird nest cleansing
- Maintain natural nutrient of bird nest
- For removing odour in edible nest storage box
- For sterilizing nest-cleaning tools
- For purifying water for the use in nest cleaning
- For reducing and eliminating nitrite, heavy metals and toxin contents
- For preventing fungus growth on bird nests
- For eliminating germs and bacteria
How to use:
For odour removal/Fungus prevention during storage
Insert the output pipe into the storage container for 10 minutes.
Repeat this process if odour remains.
For sterilizing cleansing tools
Place the aeration stone into the water with the cleansing tools for 15-20 minutes.
For purifying of bird nest
First, purify the water for 10-15 minutes.
Then, submerge the bird nests in the water and continue to purify for another 5-10 minutes.
NM10 STAINLESS STEEL MESH DRYING MOULD 5'S
Mesh design to speed up nest drying process after eliminating the feather and before proceed to molding stage.
Made of durable food grade stainless steel material.
Size: 12.5cm x 7.5cm
A32 G1L4 CONCENTRATED AROMA CAN
Fiber absorbs the aroma G1L4 and release the aroma in bird house.
There is a fiber block inside the can which is with the concentrated G1L4 aroma.
Place the can nearby entrance hole, roving area, nesting area etc to attract new coming swiftlets to stay at our swiftlet house.
It may be used together with fan dispenser to spread the aroma into wider area in swiftlet house.
May refill the G1L4 aroma liquid on the fiber and let it absorbs the aroma whenever the smell is getting less strong.
May use the aroma can with fan dispenser to spread the smell to wider area.
PC11 TRANSFORMER 150V STEP DOWN T-2150 (BLACK)
Connect 2 aluminium wires/ stainless steel cables to the positive and negative ends of the transformer respectively at the entrance hole. The output of the transformer will shock the intruders to bird house such as lizard, bat, pigeon, owl, crow etc whichever steps on the positive and negative output wire/cable from the transformer.
It will not affect the swiftlets as they will fly into bird house directly without touching the edge of the entrance hole.
sample of aluminium wire installation at the edge of entrance hole
(Rmk: The plank was moved from its original horizontal position)
TM03 FARBEN IRRIGATION TIMER
1. Water tap connection
2. Union nut
3. LCD dsiplay
4. Control key
5. Battery compartment
6. Hose connection
7. Screw cover
21mm tap with 26.5mm thread
13mm (1/2”) – suitable for all known plug-in systems
Max. 10 bar/150 PSI
Max. 40 degree Celsius
Clear fresh water
2 x 1.5V Mignon AM/L 26
This irrigation computer must be used only for the control of irrigation systems in the domestic sector.
Connecting to the water tap
- For connection you need a water tap with a 26.5mm thread.
- Unscrew the union nut (2) to enable the water tap connection (1) to move freely.
- Screw irrigation computer firmly onto the water tap by the tap connection. Turnthe appliance so that the control panel can be seen easily.
- Screw union nut up tight.
- Connect hose to hose connection (6).
Screw connection up by hand . Do not use a wrench.
Always keep screw cover (7) closed to prevent dirt from entering and incorrect operation.
TL07 WLS PLANK PRESSURE GUN MODEL: F30
Nail chamber capacity: 100pcs
Nail size: 10-30mm
Way to use:-
Connect air hose to nail gun. Load the nails(suitable size) to the nail chamber. Start to operate when the pressure reaches 0.4MPa.
A28 PW CONCENTRATE 200G
Concentrated aroma from EKA WALET,Indonesia.
Mix well 1 part of PW Concentrate to 3 parts of water and spray it to wall of entrance hole, roving area & nesting area and 0.5 meter away from nesting plank.
Besides, pour inside water pond in swiftlet house is another way to apply it.
Repeat this process every 1-3 months.
A30 EM1 250ML
Effective microorganism (EM1) plays an important role in maintaining the inner environment of swiftlet house to be clean and free from bacteria.
Mix it with water 1:1000 and spray it on wall and floor inside swiftlet house.